Cisco Catalyst IW6300 Heavy Duty Series Installing Manual page 11

Installing the Access Point
Note
Figure 10: Assembling Access Point to Hands-Free Attach Point with Top Support Bolts
1
2
Step 12 Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access point.
The access point should be positioned with the LEDs on the bottom to allow viewing from the
ground and with the hinged cover facing out.
Top Support M8 x16 bolt hole
Second M8 x16 bolt hole
3 Hands-free attach point
Installing the Access Point
Pole Mounting
11