Launching The IPE Programming Application
1.
After installing the software, double-click the MPLAB
application icon located on the desktop. The IPE main window opens.
2.
From drop-down menu, select as follows:
Family: All Families
Device: PIC16F1939
Tool:
PICkit4S. No: "Programmer Serial #"
3.
Click Connect to connect to Device and Tool and make sure there is
no Connection error in the Output window.
4.
If a Caution screen displays, click OK to continue.
IPE v5.25
®
SolarTouch Controller Firmware Update User's Guide
7