User Interface Display Identification - Follett Chewblet 7 Series Installation, Operation And Service Manual

User Interface Display Identification

Operation Display
Condition
Normal
operation
Cleaning
Mode
Drip tray full
Six-month
periodic
maintenance
required
Maintenance
Mode
Service -
8000 hr
bushing
check
Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz
Procedure
—
Press and release maintenance/
clean switch to clean the user
interface without dispensing ice or
water (see Maintenance/Cleaning
Mode on page 12).
Empty drip tray.
Follow Maintenance Mode
procedure (below) and also
Cleaning and Sanitizing
see
Procedure on page 14.
Enter Maintenance Mode by
pressing maintenance/clean switch
until displays. Complete the
cleaning and sanitizing procedure
shown on page 14 and change
the filter, if so equipped. Exit
Maintenance Mode by pressing and
holding maintenance/clean switch
until no longer displays.
Call Follett Technical Service Group
at (877) 612-5086 or +1 (610) 252-
7301. The flashing wrench indicates
that the 8000 hr bushing check is
required.
27