User Interface Display Identification - Follett 7CI100A Installation, Operation And Service Manual

Service
(continued)

User Interface Display Identification

Operation Display
––––––––––––––––––––––––––––––––––––––––––––––––––––
Condition
Normal operation
Cleaning Mode Press and release maintenance/clean
switch to clean the user interface
without dispensing ice or water (see
Maintenance/Cleaning Mode on
page 11).
Drip tray full Empty drip tray.
Six-month periodic Follow Maintenance Mode procedure
maintenance (below) and also see
required Sanitizing on page
Maintenance Enter Maintenance Mode by pressing
Mode maintenance/clean switch until
displays. Complete the cleaning and
sanitizing procedure shown on
13 and change the filter, if so
equipped. Exit Maintenance Mode by
pressing and holding maintenance/
clean switch until
displays.
Service - 8000 hr Call Follett Technical Service Group
bushing check
at (877) 612-5086 or +1 (610) 252-
7301. The flashing wrench indicates
that the 8000 hr bushing check is
required.
Dispenser and Icemaker 7CI100A/7FS100A
Procedure
—
Cleaning and
13.
page
no longer
19