Figure 3-17 Search And Rescue Configuration Page - Garmin GTN Xi Series Maintenance Manual

3.2.4.5 Search and Rescue
The GTN Xi can enable Search and Rescue features. A Search and Rescue Enablement Card
(P/N 010-00878-03) is needed for enablement.
To enable Search and Rescue features:
1. Power off the GTN Xi by opening the NAV/GPS circuit breaker.
2. Remove the database SD card from the data card slot and insert the Search and Rescue Enablement
Card (P/N 010-00878-03).
3. Power on the GTN Xi in Configuration mode by applying power (i.e., closing the circuit breaker)
while holding the HOME key.
4. Navigate to the Search and Rescue Configuration page from the GTN Options page. Touch the
Search and Rescue key, as shown in Figure 3-17.
5. When prompted, touch the Yes key to enable Search and Rescue.
6. Select the Search and Rescue (SAR) patterns desired in the SAR patterns section of the options
page, as shown in Figure 3-17.

Figure 3-17 Search and Rescue Configuration Page

190-01007-C1
Rev. 1
GTN Xi Part 23 AML STC Maintenance Manual
Page 3-18