Data Card/Flight Stream 510 - Garmin GTN Xi Series Maintenance Manual

6.3 Data Card/Flight Stream 510

CAUTION
Handle the data cards carefully. Do not touch the connector edge of the data card.
NOTE
A data card or Flight Stream 510 containing databases is required for full system
functionality. One of the two must be installed.
Removal
1. Ensure that the GTN Xi unit is powered off.
2. Remove the data card/Flight Stream 510 by pressing the card until it disengages and then pulling
the card to extract it from the unit.
Re-installation
1. With the label facing right, insert the new data card/Flight Stream 510 into the data card slot on the
front-left of the GTN Xi by pushing the card straight into the slot.
2. Press until it is fully inserted and locked into position.
190-01007-C1
Rev. 1
GTN Xi Part 23 AML STC Maintenance Manual
Page 6-9