Table 6-5 lists part numbers for the fan kit that are used with P1001 only.
Figure 6-9 Ref
1
Fan Cable Assembly, 3-Conductor Harness
2
Pin Contact, Crimp, #22D
3
Silicone Fusion Tape
Color
Red
Power
Black
Ground
Yellow
Fan tach
Fan Wiring Harness Replacement
1. Strip 0.17 inches of insulation from each wire prior to crimping. Crimp socket contacts onto each
wire of the 3-conductor wire harness. Insert newly crimped socket contacts and wires into the
appropriate connector housing location, as shown in Figure 6-9.
2. Plug the 3-conductor wire harness connector into the connector on the fan.
190-01007-C1
Rev. 1
Table 6-5 Fan Kit
Description
Table 6-6 Fan Cable Wire Color Reference Chart
Function
320-00600-00
336-00021-00
249-00114-00
59
43
58
GTN Xi Part 23 AML STC Maintenance Manual
Garmin P/N
P1001 Contact
Page 6-16