8. The progress window shown in Figure 3-8 will appear while the card is being created.
Figure 3-8 Software Loader Card Progress Window
9. After the card has been created, the window shown in Figure 3-9 will appear. Click Finish to
complete the update process.
10. Eject the card from the card reader (or stop the card reader in Windows). The GTN Xi Software
Loader Card is now ready to use.
190-01007-C1
Rev. 1
Figure 3-9 Software Loader Card Completion
GTN Xi Part 23 AML STC Maintenance Manual
Page 3-7