Table of Contents
Advertisement
CTP 5.2 Hardware Guide
CTP1004 and CTP1012
6
CTP1000-Series Models
Figure 2: CTP1002 Rear Panel
Ethernet
Console
. . . . . . . . . . . . .
. . . . . . . . . . . .
SE-0/0
USB
The CTP1004 system and CTP1012 system have a removable flash drive accessible
from the front. You can remove the flash drive by pressing the eject button next to
the card. The systems must be powered off when you insert or remove the flash
drive. The CTP1004 system (Figure 3) and CTP1012 system (Figure 4) front panels
include:
Power LED —Illuminated green when power is connected and the front panel
power switch is set to ON position.
HDD LED —Illuminated red when the flash drive is in use.
Front power switch—Set to ON position when the switch is briefly pressed. Set
to OFF position when the switch is pressed for 4 or more seconds.
Removable flash drive.
USB ports (CTP1004 only).
Figure 3: CTP1004 Front Panel
POWER
FLASH
SWITCH
DRIVE
HD
POWER
. . . . . . . . . . . . .
. . . . . . . . . . . .
SE-0/1
E xtern al R ef erenc e
In p ut
. . . .
or
. . . . .
D B 9
B N C
USB
CTP1004
Advertisement
Table of Contents
