Disassembly - Sir - Electric Maintop - Bosch FSR Series Training Manual

Disassembly – SIR – Electric Maintop
It is necessary to remove the maintop to access the elements and the hot indicator bracket and light.
The maintop is held down by ball studs and one screw in the back. To remove the maintop:
1. Remove the rear screw
2. Lift the maintop off the ball studs (this may require a little effort).
Replace the maintop by placing it over the ball studs and applying enough pressure to set the maintop
in place. Replace the rear screw.
Rear Screw
Jan. 2008, Iss. 1
Ball studs
50