Operation Of The Electric Oven - Bosch FSR Series Training Manual

Operation of the Electric Oven

1. Touch [Bake] and set temperature at the
control. The relay board receives input and
checks resistance of sensor. If heat is required
the following relays will close: K3 & K4 for the
bake element and K1 & K2 for the broil
element.
2. The output voltages from the board should be
as follows: X15-L1 to bake element, X16-L2 to
bake element. X11-L1 to broil element, X12-L2
to broil element.
3. This supplies 120V from L1 & L2 giving each
element 240V and the oven heats.
NOTE: See charts on next page for element "On
Times."
Jan. 2008, Iss. 1
33