Disassembly - Access to Maintop – FSR/FSR3 Cont'd
6
Lift the maintop a couple of inches to disengage the locking tabs and slide towards the front of the unit.
Lift the front of the maintop and fold back against the control panel. (place towel or blanket over control
panel to avoid scratching panel or maintop) The elements, control, and latch assembly can now be
accessed.
8
Remove the screws which
hold the 2 rear panels and
disconnect the ground screw
from the maintop support
9
Jan. 2008, Iss. 1
7
Ground
Screw
10
48