Disassembly - Sir - Elec/Df Control Panel - Bosch FSR Series Training Manual

Disassembly – SIR – Elec/DF Control Panel
The Slide-In Range (SIR) has a different access to the control board, valves and valve switches, and
elements. This requires removal of the control panel. To remove the control panel:
1. Locate the four screws holding the control panel to the frame – 2 on each side.
2. It is not necessary to remove the knobs and bezels to remove the panel. Remove the
screws and slide the panel out from the unit. Open the door ajar so that the panel can rest
upon the door (it is suggested to place a towel or piece of cardboard under the panel to
avoid scratching.
Screws
Jan. 2008, Iss. 1
49