IMB202 LGA775 ATX Board User's Manual
Hardware Reset
Pins 11 and 12 are designed for Hardware Reset.
HDD Activity LED
This connector extends to the hard drive activity LED on the control
panel. This LED will flash when the HDD is being accessed. Pins
13 and 14 can be connected to the hard disk drive and front panel
HDD LED.
2.4.12 Internal Mouse/Keyboard Connectors (CN46,
CN41)
The board provides a keyboard (CN46) and Mouse (CN41) interface
with two 5-pin connectors.
2.4.13 LAN1 (CN17)/LAN2 (CN12) Speed LED
Connectors
Pin
100, Low Active -
1
Speed LED power +
2
3
Gigabit, Low Active
-
2.4.14 LAN1 (CN19)/LAN2 (CN13) Act/Link LED
Connectors
Pin
1
2
18
Signal
Signal
Link active +
Link active -
Jumpers and Connectors