Answering Calls; Useful Features During A Call - Panasonic KX-TGF880 Series Operating Instructions Manual

2
Dial the phone number.
3
Lift the corded handset.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.

Answering calls

When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the CELL
indicator and SP-PHONE indicator flash rapidly.
1
Lift the corded handset or press MZN when the
unit rings.
R You can also answer the cellular call by
pressing MCELL 1N or MCELL 2N.
2
When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press MZN.
Temporary ringer off: You can turn the ringer off
temporarily by pressing M N.
Adjusting the base unit ringer volume
Press MDN or MCN repeatedly to select the desired
volume while ringing.
R To turn the ringer off, press and hold MCN until
the unit beeps.
Note:
R You can adjust the ringer volume for cellular call
and landline call by programming (page 46,
48).
R The ringer volume you set is kept for each line
(landline and cellular lines).

Useful features during a call

Hold
1
Press MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
2
To release hold on the cellular line:
Press MCELL 1N or MCELL 2N, then lift the
corded handset.
R A handset user can take the call: MCELLN
a MbN: Select the corresponding cellular
phone. a MSELECTN
*1 The call is taken in the following situations.
For assistance, please visit http://shop.panasonic.com/support
TGF88x(en)_1104_ver033.pdf 27
Making/Answering Calls Using the Base Unit
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 20).
To release hold on the landline:
Lift the corded handset.
R A handset user can take the call by
pressing M
Note:
R While a landline call is on hold, the SP-PHONE
indicator flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press MMUTEN during a call.
R When the speakerphone is used, the
SP-PHONE indicator flashes.
2
To return to the call, press MMUTEN.
Flash for landline calls
MFLASHN allows you to use the special features of
your host PBX such as transferring an extension
call, or accessing optional telephone services.
Note:
R To change the flash time, see page 50.
For call waiting or Call Waiting Caller
ID service users
To use call waiting or Call Waiting Caller ID, you
must first subscribe with your phone service
provider.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd caller's
information is displayed on the unit that is in use
after you hear the call waiting tone.
1
Press MCALL WAITN to answer the 2nd call.
2
To switch between calls, press MCALL WAITN.
Note:
R Please contact your phone service provider for
details and availability of this service in your
area.
*1
N.
27
2019/11/05 13:22:53