Panasonic KX-TGF880 Series Operating Instructions Manual page 24

Making/Answering Calls Using the Handset
R 2 way recording is not available during
conference calls.
R The recording will end in the following situations:
– When MFLASHN is pressed.
– When the hold or intercom feature is used.
R When memory is/becomes full:
– "Memory full" is shown on the display.
– An error tone sounds.
Call share
You can join an existing outside call.
n While another unit is on a cellular call:
1
To join the conversation, press MCELLN.
R You can join the conversation in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 20).
2
MbN: Select the corresponding cellular
phone. a MSELECTN
n While another unit is on a landline call:
To join the conversation, press M
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 50).
R A 2nd party cannot join an outside call that is
being recorded (page 23).
Transferring calls, conference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
– between handsets
– between a handset and the base unit
1
During an outside call, press MMENUN.
2
MbN: "Intercom" a MSELECTN
3
MbN: Select the desired unit. a MSELECTN
R If you select "Voice paging", the call will
be switched from the ear-receiver mode to
the speakerphone mode.
4
Wait for the paged party to answer.
R If the paged party does not answer, press
MBACKN to return to the outside call.
24 For assistance, please visit http://shop.panasonic.com/support
TGF88x(en)_1104_ver033.pdf 24
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conference" a
MSELECTN
R To leave the conference, press MOFFN. The
other 2 parties can continue the
conversation.
R To put the outside call on hold: MMENUN a
MbN: "Hold" a MSELECTN
To resume the conference: MMENUN a
MbN: "Conference" a MSELECTN
R To cancel the conference: MMENUN a MbN:
"Stop conference" a MSELECTN
You can continue the conversation with the
outside caller.
Transferring a cellular call between
the handset and a cellular phone
Transferring a cellular call from the handset to
a cellular phone
1
Press MMENUN during a cellular call.
N.
2
MbN: "Transfer to cell" a MSELECTN
R The cellular call is transferred to the cellular
phone.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be ready
to talk before transferring. For example, if your
cellular phone has a top cover, open it
beforehand.
Transferring a cellular call from a cellular
phone to the handset
During a conversation using a cellular phone, the
call cannot be transferred to the handset by the
cellular phone. Perform the following with the
handset.
1
During a conversation using a cellular phone,
press MCELLN.
R The call is transferred to the handset in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular calls
(page 20).
2
MbN: Select the corresponding cellular phone.
a MSELECTN
R The call is transferred to the handset.
2019/11/05 13:22:53