Panasonic KX-TGF880 Series Operating Instructions Manual page 82

Useful Information
Problem
I cannot have a conversation
using the headset.
or
I cannot connect my headset to
the base unit.
Noise is heard during a call on
the headset.
Some headset enhanced
features are not available.
An error tone is heard when I try
to program the Bluetooth feature.
App alert is not displayed or
announced.
or
Text message alert is not
displayed or announced.
Your cellular phone's voice
recognition feature does not start
after pressing M N.
82 For assistance, please visit http://shop.panasonic.com/support
TGF88x(en)_1104_ver033.pdf 82
Cause/solution
R Confirm that the Bluetooth wireless headset supports the
HeadSet Profile (HSP) specification.
R Your Bluetooth headset is not paired. Pair it (page 63).
R Turn your headset off, then turn it on and try again.
R If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the headset
from your cellular phone, then perform the connecting
procedure from the base unit.
R Only 1 Bluetooth device can be used with the unit at a time.
R A Bluetooth headset can communicate with the base unit within
a range of approximately 10 m (33 feet). The connection may
be subject to interference from obstructions such as walls or
electronic devices. Move closer to the base unit.
R The base unit does not support enhanced features such as Last
number redial or Call reject.
R The Bluetooth feature cannot be accessed immediately after
connecting the AC adaptor to the base unit. Wait a few seconds
and try again.
R The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting. Wait a
few seconds and try again.
R Confirm that the cellular phone supports the Message Access
Profile (MAP) specification to use text message alert feature.
R Confirm that the cellular phone supports the Serial Port Profile
(SPP) specification to use App alert feature.
R Confirm that the [Application Alerts manager] setting of your
Android phone is turned on.
R "Alert On/Off" is set to "Off". Set it to "On" (page 62).
R "Voice alert" is set to "Off". Set it to "On" (page 62).
R The Bluetooth device's Bluetooth notifications setting is turned
off.
R The handset selected to display and/or announce alerts is in
use.
R The Bluetooth device or its corresponding cellular line is in use.
R Your cellular phone's Bluetooth feature is turned off. Turn it on.
R The unit which is not selected to ring for cellular calls does not
ring. To change the selection, see page 18.
R This feature may not be available when your cellular phone is in
use. Try again later.
R If you cannot use this feature while your cellular phone is
locked, unlock your phone and try again.
R For some cellular phones, you may be able to set your phone to
allow its voice recognition feature to be used even when the
phone is locked. For more information, refer to the operating
instructions of your cellular phone.
R You may not be able to use this feature if other features or
applications on your cellular phone are using Bluetooth
features. Turn off these features or exit these applications, and
then try again.
2019/11/05 13:22:57