Information And Warnings - Tunturi J 440 Owner's Manual

Electronic treadmill
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
PLEASE READ THIS OWNER'S MANUAL THROUGH CAREFULLY BEFORE ASSEMBLING,
USING AND SERVICING THE TREADMILL. FOLLOW THE INSTRUCTIONS DESCRIBED IN THIS
MANUAL CAREFULLY.
THE EQUIPMENT HAS BEEN DESIGNED FOR USE AT HOME AND FOR INSTITUTIONAL
REHABILITATION. PLEASE NOTE THAT THE WARRANTY DOES NOT COVER DAMAGE DUE
TO NEGLIGENCE OF ADJUSTMENT OR MAINTENANCE INSTRUCTIONS DESCRIBED IN THIS
MANUAL. PLEASE PAY PARTICULAR ATTENTION TO THE NOTES REGARDING LUBRICATION
AND ADJUSTMENT OF THE RUNNING BELT.
The figures referred to in the text are in the back fold.
Before connecting the device to a power source make sure that the local voltage matches that which
is indicated on the type plate (at the lower right front corner). The device operates on 230 V voltage.
Please note that the device's maximum power consumption is 10 A. The device may only be plugged
into an earthed socket. Never use extension cords between the treadmill and your wall outlet.
Outlets, that service multiple appliances, or have fluctuating voltage of more than 5 %, may result in
erratic performance or cause damage to treadmill electronics. Using electrical power other than that
which has been specified in this manual, will ultimately void any warranty, implied or otherwise.
*
Before you start using the treadmill, make sure that it functions correctly in every way. Do not use a faulty
device.
*
Do not attempt any servicing or adjustment other than those described in this manual. The given
instructions must be followed carefully.
*
Before operating the treadmill familiarize yourself with the adjustments, displays and keys.
*
Never operate with the dust or side covers removed.
*
Make sure that the treadmill is unplugged and turned off before beginning any assembly or maintenance
procedures.
*
Always unplug the treadmill from the electrical outlet after each training session.
*
Do not pull the treadmill by its power cord.
*
Do not use outdoors.
*
Place the treadmill on a firm, level and protected surface. Allow 120 cm or 4 feet of clearance behind
the treadmill and 60 cm or 2 feet on either side and in front of the treadmill.
*
If children are allowed to use the treadmill, they should be supervised and taught to use it properly,
keeping in mind the child's physical and mental development and their personality.
*
This treadmill is equipped with a cord having an equipment earthed connector and an earthed plug. Do
not modify the plug provided with the treadmill in any way. If it will not fit your outlet, have a proper outlet
installed by a person familiar with the maintenance of electromechanical devices and authorized under the
laws of the country in question (or otherwise) to carry out maintenance and repair work.
*
Do not apply silicone as it will damage the running deck.
NOTE!
*
Before you start any training, consult a physician to check your state of health.
*
If you experience nausea, dizziness or other abnormal symptoms while exercising, stop your workout at
once and consult a physician.
*
Only one person may use the treadmill at a time.
*
Always use the handlebar when stepping on or off the treadmill and when changing speed. Do not jump
off the running belt when it is moving.
*
Keep hands clear of any moving parts. Never place hands, feet or any other objects under the tredmill.
*
Wear appropriate clothing and shoes when exercising. Make sure your shoelaces are properly tied. To
avoid injury and unnecessary wear on your treadmill, be sure your shoes are free of any debris such as
gravel and small pebbles.
*
Always clip the cord attached to the safety tether key to a part of your clothing so that the key will
be pulled from its place, stopping the treadmill, if necessary.
*
Always strech your muscles prior to and following any exercise program.
*
The treadmill must not be used by persons weighing more than 110 kg.

INFORMATION AND WARNINGS

2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents