True Fitness Excel Series Owner's Manual page 26

Choices During Workout Setup
C T
HAPTER WO
5 - Warm up. At the beginning of an HRC workout, the
treadmill is in full Manual Control mode. Gradually
increase your work level to slowly raise your heart
rate to within 10 beats per minute (bpm) of your
target heart rate.
6 - Heart rate control stage. Now the treadmill takes
control of speed and incline, keeping your heart rate
within a few bpm of your target. If you are using
interval HRC, the treadmill alternates between work
and rest intervals.
7 - Cool-down. At the end of your workout time or
distance, the treadmill reduces workload by half and
goes back into Manual Control mode, where you
directly control your cool-down.
• Your treadmill can remember more than one workout
setup for a heart rate control workout. The ES 5.0 has
five target and two interval HRC setups; and the ES
7.0 and ES 9.0 have 5 target, 5 interval, and 4 distance-
based HRC setups. It stores each set of workout
parameters under numbered workouts, for example,
"Target HR 1," "Target HR 2," "Interval HRC 1," etc.
You can select these in later workouts so you don't
have to re-enter your workout parameters, which tend
to stay the same from workout to workout.
• During workout setup, if you keep pressing
you will continue to scroll through the workout setup
parameters. You can press
the current parameters and begin your workout.
E
26
: H R C
EART ATE ONTROL
S
X C E L E R I E S
W
ORKOUTS
at any time to accept
O ' G
W N E R S U I D E
During
Workout
Setup
,