Raymarine AIS 350 Installation Instructions Manual page 59

Data connections matrix
The following table details the types of data (GPS and / or AIS) that can be exchanged using the various combinations of data connections
(Low / High baud rate NMEA 0183; NMEA 2000 / SeaTalk
It is important to choose the right combination of connections in order to exchange the types of data you require.
As an example of how to use the table below, you can see that you can feed GPS data into the AIS unit via NMEA 0183 (low baud rate),
and then output it to other NMEA 0183 devices using the AIS unit's NMEA 0183 (high baud rate) connections. With this particular
combination of connections, the AIS unit will also add AIS data to the output data stream:
AIS unit
INPUTS (GPS
data) AIS unit OUTPUTS
NMEA 0183 (4800 low baud rate)
GPS
NMEA 0183
(4800 low baud
rate)
NMEA 0183
(38400 high
baud rate)
NMEA 2000* /
SeaTalk ng
AIS650 Class B transceiver
ng
NMEA 0183 (38400 high baud
rate)
AIS GPS
; USB).
NMEA 2000* / SeaTalk
AIS GPS
ng USB
AIS GPS AIS
59