Raymarine AIS 350 Installation Instructions Manual page 34

USB
PWR/Data
Wire color (AIS unit)
1 Yellow
2 Grey
3 Pink
4 Purple
5 Green
6 White
7 Blue
8 Brown
34
NM EA 0183
1
2
3
4
5
6
7
8
NMEA 0183 baud
Signal rate
IN — 4800
IN + 4800
OUT — 4800
OUT + 4800
IN — 38400
IN + 38400
OUT — 38400
OUT + 38400
VHF connection
The AIS unit requires a VHF antenna connection.
• In systems which do NOT include a VHF radio, connect a VHF
antenna directly to the VHF ANT connection on the AIS unit.
4800
• In systems which include a VHF radio, a separate AIS / VHF
baud
splitter (such as the Raymarine AIS100) is recommended. This
splitter device is capable of taking a VHF signal from a single
antenna and providing the signal to 2 separate devices (e.g. AIS
unit and VHF radio) at the same time. The "AIS" output from the
splitter should be connected to the VHF ANT connection on the
38400
AIS unit.
baud
• Refer to the Typical systems section for examples on how to
make these connections.
D13035-1
USB connection
The AIS unit includes a Mini-B USB port which provides PC
connectivity. To enable connection of the AIS unit to a PC the USB
drivers, supplied on the software CDROM must be installed on the
PC
The USB port can be used to:
• Use of PC based charting software when connected to AIS.
• Perform software update
AIS350 / AIS650