Raymarine AIS 350 Installation Instructions Manual page 50

Typical Systems
AIS650 Basic system example (SeaTalk
1 2
AIS650
Status AIS650 Cla s s B Tra ns ce ive r
USB
PWR/Data S T GPS ANT VHF ANT
VHF
12 V / 24 V
GPS
SeaT alk ng
Description
1 VHF antenna
2
GPS receiver
3 SeaTalk ng Multifunction display
4 SeaTalk ng GPS receiver
50
ng only)
12 V 12 V / 24 V *
Notes
Supplied with AIS unit. Provides
GPS data to the AIS unit only.
To avoid potential data conflicts,
do NOT connect the multifunction
display to the AIS unit by NMEA
0183 and SeaTalk ng at the same
time.
If your multifunction display
includes an internal GPS, a
dedicated external GPS receiver
may not be required.
Note:
• For more information on which types of data are supported
by the various connections and also the related supported
baud rates for NMEA 0183 connections, refer to the
connections matrix.
• For more information on making general connections, refer to
the 3.3 Cables and connections
• For more information on available cables and accessories
(including part numbers), refer to
accessories.
• * Some Raymarine SeaTalk
only. Refer to the product's documentation for more information.
• For more information on general power requirements and
connections, refer to the
D12094-2
section.
Chapter 6 Options and
ng Multifunction displays are 12 V
Power connection section.
AIS350 / AIS650
Data