Raymarine AIS 350 Installation Instructions Manual page 54

Description
1 NMEA 0183 VHF radio
2 AIS / VHF splitter
3 VHF antenna
4 SeaTalk ng GPS receiver
5 GPS receiver
6 SeaTalk ng Multifunction display
54
Notes
• If your VHF radio is AIS-capable,
the AIS functions on the radio
should be disabled if connecting
the radio to the AIS unit. For
instructions on how to do this,
refer to the documentation that
accompanies your VHF radio.
• To avoid potential data conflicts,
do NOT connect the VHF radio
to the AIS unit by NMEA 0183
and SeaTalk ng at the same time.
For example, AIS100 splitter.
For example, RS130 GPS receiver.
If your multifunction display
includes an internal GPS, a
dedicated external GPS receiver
may not be required.
Supplied with AIS unit. Provides
GPS data to the AIS unit only.
To avoid potential data conflicts,
do NOT connect the multifunction
display to the AIS unit by NMEA
0183 and SeaTalk ng at the same
time.
Note:
• For more information on which types of data are supported
by the various connections and also the related supported
baud rates for NMEA 0183 connections, refer to the
connections matrix.
• For more information on making general connections, refer to
the 3.3 Cables and connections
• For more information on available cables and accessories
(including part numbers), refer to
accessories.
• * Some Raymarine SeaTalk
only. Refer to the product's documentation for more information.
• For more information on general power requirements and
connections, refer to the
section.
Chapter 6 Options and
ng Multifunction displays are 12 V
Power connection section.
AIS350 / AIS650
Data