Subaru Ascent 2020 Quick Manual page 26

OPERATING THE VEHICLE
X-MODE
®
X-MODE is the integrated control system of the
engine, All-Wheel Drive (AWD) system and Vehicle
Dynamics Control (VDC) systems. It helps to maximize
traction in slippery conditions such as mud or snow. In
certain situations such as deep mud or snow, it may help to turn VDC off to allow for more
wheel spin. X-MODE functions with the select lever in the "D" or "R" position.
Press the X-MODE button with the vehicle speed less
than 12 mph to activate the system. When active,
the Multi-Function Display (MFD) shows the steering
direction, vehicle angle and power distribution. If the
vehicle speed reaches 25 mph while X-MODE is active,
the system is cancelled and you will need to activate it again once you reach a lower speed.
Hill Descent Control (HDC)
This function helps maintain a constant vehicle speed when driving down steep hills or
declines. HDC is automatically engaged with X-MODE and functions with the select lever
in the "D" or "R" position.
ELECTRONIC PARKING
BRAKE (EPB)
To apply the parking brake, pull up the parking
brake switch. The indicator light on the parking
brake switch will illuminate and "PARK" will appear
in the combination meter.
To release the parking brake manually, depress the brake pedal and push the parking
brake switch down. To automatically release, gently press the accelerator pedal with
the select lever in the "D" or "R" position. NOTE: All the doors must be closed and your
seatbelt must be fastened.
24