Additional Specifications - Subaru Ascent 2020 Quick Manual

Hide thumbs Also See for Ascent 2020:
Table of Contents

Advertisement

ADDITIONAL SPECIFICATIONS

NEW VEHICLE BREAK-IN
The performance and long life of your Subaru are dependent on how you handle and care
for your Subaru while it is new.
Follow these instructions during the first 1,000 miles:
• Do not race the engine.
• Do not drive at one consistent engine or vehicle speed, either fast or slow.
• Avoid starting suddenly and rapid acceleration, except in an emergency.
• Avoid hard braking, except in an emergency.
ENGINE OIL
Use 0W-20 synthetic, with one of the follow specifications:
• API classification SN with the words "RESOURCE CONSERVING".
• ILSAC GF-5, which can be identified with the ILSAC certification mark (Starburst mark).
ENGINE OIL CAPACITY
4.8 US quarts (during oil and filter change). There is
approximately 1 quart between the low and full level.
1
Full Level
2
Low Level
ROOF RAIL CAPACITY
CROSS BAR DYNAMIC
150 Pounds
32
ROOF RAIL DYNAMIC
176 Pounds
1
2
ROOF RAIL STATIONARY
700 Pounds

Advertisement

Table of Contents
loading

Table of Contents