Getting Comfortable - Subaru Ascent 2020 Quick Manual

GETTING COMFORTABLE

SEATING
Manual Seats
Forward/Backward: Pull the lever below the
1
seat up and slide the seat forward or backward.
Release the lever and make sure the seat is
locked into place.
Seat Height (Driver's Seat): Pulling up or
2
pushing down on the lever will raise or lower
the seat cushion.
Recline Seatback: Pull the lever up to adjust the seatback to the desired position.
3
Release the lever and make sure the seat is locked into place.
Power Driver's Seat (if equipped)
Forward/Backward and Height: Moving the
1
switch forward or backward will adjust the seat in
that direction. Pulling up or pushing down on the
front of the switch will adjust the angle of the seat
cushion. Pulling up or pushing down the entire
switch will adjust the height of the seat cushion.
Recline Seatback: Moving the switch forward or
2
backward will adjust the
angle of the seatback.
Lumbar Support (if equipped): Pressing the
3
front of the switch will increase support. Pressing
the rear of the switch will decrease support.
Thigh Extension (if equipped): Pull up on
4
the lever below the seat cushion to adjust
the length.
Memory Driver's Seat (if equipped)
You can set a seat position and retrieve it using the buttons on the driver's door or each of
the access key fobs.
To set a seat position with a button:
1. Make sure the select lever is in the "P" position.
2. Adjust the seat to the desired position.
3. While holding the "SET" button, press and hold
either button "1" or "2". A chirp sounds when
the position is registered.
8
3
2
1
2
1
4
3
3