Operating The Vehicle - Subaru Ascent 2020 Quick Manual

OPERATING THE VEHICLE

IGNITION SWITCH
The ignition switch has four positions:
LOCK: You can only insert or remove the key in this position.
ACC (Accessory): Provides power to the radio and accessory power outlets.
ON: All electric systems are available. The key returns to this position after starting the engine.
START: Turn the key to this position to start the engine.
PUSH-BUTTON IGNITION
SWITCH
(if equipped)
Each time you press the ignition switch without
depressing the brake pedal, the ignition position will
change as follows: ACC, ON, OFF.
ACC (Accessory): Provides power to the radio and
accessory power outlets. The orange LED illuminates.
ON: All electrical systems will be available. The orange LED illuminates.
OFF: Power off and indicator off.
STARTING THE ENGINE
Without Push-button Ignition
To start the engine:
1. Make sure the select lever is in the "P" position.
2. Using the key, turn the ignition switch to "START".
NOTE: Do not depress the accelerator pedal.
Release the key as soon as the engine starts.
With Push-button Ignition
To start the engine:
1. Sit in the driver's seat with the access key fob.
2. Make sure the select lever is in the "P" position.
3. Depress the brake pedal. The green LED on the ignition switch illuminates.
4. While depressing the brake pedal, briefly press and release the ignition switch.
22