Table of Contents
Advertisement
CONTROLS
WINDSHIELD WIPERS
To turn on the wipers, press the wiper
control lever down one position for
intermittent, two positions for low speed,
or three positions for high speed. To turn
the wipers off, return the lever to the
"OFF" position. For a single wipe, move
the lever up one position.
When the lever is in the intermittent
position, rotate the dial to adjust the
operating interval of the wipers.
Pull the lever toward you to spray washer fluid. The washer will spray until you release the
lever, then wipe twice.
Rain Sensing Windshield
Wipers (if equipped)
Press the wiper control lever down one
position. When the wiper control lever
is in the "AUTO" position, the wipers
operate automatically when the rain/light
sensor on the windshield glass detects
moisture on the windshield. Rotate the
dial to adjust the sensitivity of the rain/
light sensor. Make sure you turn off the
wipers before entering a car wash. All
other functions of the wiper system work
the same as above.
18
SINGLE
OFF
INT.
1
LOW
HIGH
OFF
AUTO
1
Hide quick links:
Advertisement
Table of Contents
