Subaru Ascent 2020 Quick Manual page 16

GETTING COMFORTABLE
Rear Climate Control Panel (if equipped)
1
Temperature Control Button: Press the up or down arrow to increase or decrease
the temperature.
2 Fan Speed Control Button: Press the up or down arrow to increase or decrease the
fan speed.
3
On/Off Button: Press this button to turn the rear climate control system on or off.
4
Airflow Mode Selection Button: Press this button to select the desired airflow
mode. The selected mode — ventilation, bi-level or feet — is shown on the display.
5 Automatic Control Button: This system automatically controls all of the rear climate
system. Press "AUTO" to activate. Press "OFF" to turn off the system.
To activate automatic mode:
1. Press the "AUTO" button. The "FULL AUTO" indicator light illuminates on the climate
control display.
2. Set the preferred temperature using the temperature control buttons.
If you use any of the buttons other that the temperature control buttons, the "FULL" indicator
light will turn off. The "AUTO" light remains illuminated. You can then manually control the
system as desired. Press the "AUTO" button to change back to "FULL AUTO" mode.
Remote Engine Start with Climate Control
You can remotely start your Subaru and adjust the
temperature using the Starlink Safety and Security features
through the
Ventilated Seats (if equipped)
Press the ventilated seat switch located on the climate control
system. There is a separate switch for the driver and passenger.
Each time you press the switch, the mode will change as
follows: High, Mid, Low, Off. Blue indicators will illuminate
indicating the level.
14
1
3
MySubaru App (subscription required).
2
4 5
Scan to get the
MySubaru app.