Gravely Pro-walk hydro 36HR PG Owner's/Operator's Manual page 43

ELECTRICAL SERVICE
Replacing Fuses
IMPORTANT: Avoid damage! When
replacing fuses – use only 20-amp fuses or
you may damage the circuit.
The unit is equipped with one 20-amp fuse to
protect the charging circuit. The fuse is
located under the control panel area to the
left of the relays.
1. Remove defective fuse from socket.
2. Check metal clip in fuse window and
discard fuse if clip is broken.
3. Install new fuse into socket.
988153, 56
20A fuse
Figure 48
Replacing Relays
(988154, 55, 57, 58, 59)
NOTE: Relays are interchangeable. Use only
quality replacement relays See SERVICE
PARTS on page 49.
The unit is equipped with four relays located
under the control panel area.
1. Remove defective relay from socket.
2. Install new relay into socket.
1
1. 20-Amp Fuse
2. Clutch Relay
3. Ignition Kill Relay
4. Start Relay
5. Safety Relay
1
1. 20-Amp Fuse
2. Clutch Relay
3. Ignition Kill Relay
4. Start Relay
5. Safety Relay
GB - 43
988154, 55
2 4
3 5
Figure 49
988157, 58, 59
2 5
4
3
Figure 50