Meritor T-2111 Series Maintenance Manual page 3

SERVICE NOTES
This Maintenance Manual describes the correct service and repair procedures for the Rockwell T-2111 Series
Transfer Case. The information contained in this manual was current at the time of printing and is subject to
change without notice or liability.
You must follow your company safety procedures when you service or repair equipment. Be sure you under-
stand all the procedures and instructions before you begin work on the unit.
Rockwell uses the following types of notes to give warning of possible safety problems and to give information
that will prevent damage to equipment.
!
WARNING
A warning indicates procedures that must be followed exactly. Serious personal injury can occur if the
procedure is not followed.
!
CAUTION
A caution indicates procedures that must be followed exactly. If the procedure is not followed, damage
to equipment or components can occur. Serious personal injury can also occur in addition to damaged
or malfunctioning equipment or components.
T
TORQUE
This symbol is used to indicate fasteners that must be tightened to a specific torque value.
NOTE:
A note indicates an operation, procedure or instruction that is important for correct services.
Some procedures require the use of special tools for safe and correct service. Failure to use these special
tools when required, can cause serious personal injury to service personnel or damage to vehicle components.
!
Current Rockwell DCM brake linings do not use asbestos fibers. Some aftermarket brake linings contain
asbestos fiber, a cancer and lung disease hazard. Some brake linings contain non-asbestos fibers whose
long term effects are unknown.
Caution should be exercised in handling both asbestos and non-asbestos materials as described on page 2 .
Pro Gear and Transmission • 906 W. Gore St. Orlando, FL 32805 • 1 (877) 776-4600 / (407) 872-1901 • parts@eprogear.com
ASBESTOS AND NON-ASBESTOS FIBER WARNING