Commissioning - Siemens SINAMICS S120 Manual

6 Commissioning the application
6.3

Commissioning

Table 6-1: Commissioning the sample project
No. Action
To start, please open the
1.
SIMATIC Manager.
Please unzip the project
supplied into any directory and
then open it.
2.
In the SIMATIC Manager, click
on "File" followed by "Retrieve".
Once the project has been
opened, please open the HW
config, and carry out a
3.
download.
Please load the safety program
as next step.
Depending on the particular
4.
setting, the standard blocks are
also loaded. If this is not the
case, then manually load the
blocks into the F-CPU.
56
Remark
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475