Siemens SINAMICS S120 Manual page 32

Entering limit values for safely limited speed (sls) into a sinamics s120 via profisafe with profinet

Hide thumbs Also See for SINAMICS S120:

Table of Contents

4 Configuration and project engineering

No.

Action

The computer is now inserted

with an active connection shown

in yellow.

Please save and

23.

compile the

changes that have been made.

Then close "NetPro" and return

to HW Config.

Save and compile the settings in

HW Config again.

24.

Then load the configuration into

the F-CPU.

Remark

PROFIsafe SLS Override

Version 1.0, Entry ID: 81682475

Table of Contents