Cisco Aironet 1570 Series Mounting page 9

Chapter 3 Mounting the Access Point
Continue with installing antennas, connecting the data cables, grounding the access point, and powering
Step 3
the access point. For information on these, see
Strand Mount Kit 2
The Strand Mount Kit 2 (abbreviated as SMK2) can accommodate a 1.75 inch cable bundle between the
support cable strand and the back surface of the AP. The SMK2 allows a distance of 2.42 inches from
the back surface of the AP to the center of the cable strand (see
The SMK2 consists of these parts:
•
•
•
For instructions on mounting an AP using SMK2, see
Figure 3-3 SMK2 Cable Clamps and Cable Bracket Assembly Dimensions in inches [and millimeters]
88.4
3.48
OL-32138-01
Strand mount cable brackets (see
Cable clamps (see Figure
5/16"-18 bolt for fastening the cable clamps to the strand mount cable bracket (see
103.2
4.06
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
Chapter 4, "Installing Other Components."
Figure 3-5)
3-5)
Strand Mounting Using SMK2, page
61.572
2.42
Strand Mount Kit 2
Figure 3-4).
Figure
63.5
2.50
3-5)
3-10.
3-9