Cisco Aironet 1570 Series Mounting page 6

Choosing the Mounting Kit
Depending on the particular AP version, the 1570 Series Access Point can be strand, wall, or pole
mounted. From the following tables, choose a mounting kit for you access point version based on your
mounting scenario.
Table 3-1
AP Orientation
Kit for Strand Mount without Cable Bundle
Kits for Strand Mount with Cable Bundle
Kit for Wall, Vertical Pole, Horizontal Pole and
Off-Angle Pole
Table 3-2
AP Orientation
Kits for Strand Mount with Cable Bundle
Kit for Vertical Pole
Kit for Wall, Horizontal Pole, and Off-Angle Pole
Kit for Wall, Vertical Pole, Horizontal Pole and
Off-Angle Pole
Table 3-3
AP Orientation
Kit for Vertical Pole
Kit for Wall, Horizontal Pole, and Off-Angle Pole
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3-6
Mounting Kits for AP1572IC
AP1572IC is always mounted in a horizontal orientation.
Strand Mount Kit 1
Strand Mount Kit 2
Strand Mount Kit 3
Pole Mount Kit 3
Mounting Kits for AP1572EC
AP1572EC can be mounted in horizontal and vertical
orientations. However, Strand Mount Kit 1 is not supported.
Strand Mount Kit 2
Strand Mount Kit 3
Pole Mount Kit 1
(poles of diameter 2 to 6 inches)
Pole Mount Kit 2
(poles of diameter 2 to 16 inches)
Pole Mount Kit 2
Pole Mount Kit 3
Mounting Kits for AP1572EAC
AP1572EAC is always mounted in a vertical orientation. It is
not mounted on cable strands.
Pole Mount Kit 1
(poles of diameter 2 to 6 inches)
Pole Mount Kit 2
(poles of diameter 2 to 16 inches)
Pole Mount Kit 2
Chapter 3 Mounting the Access Point
[AIR-ACCSMK1570-1]
[AIR-ACCSMK1570-2]
[AIR-ACCSMK1570-3]
[AIR-ACCPMK1570-3=]
[AIR-ACCSMK1570-2]
[AIR-ACCSMK1570-3]
[AIR-ACCPMK1570-1]
[AIR-ACCPMK1570-2=]
[AIR-ACCPMK1570-2=]
[AIR-ACCPMK1570-3=]
[AIR-ACCPMK1570-1]
[AIR-ACCPMK1570-2=]
[AIR-ACCPMK1570-2=]
OL-32138-01