Cisco Aironet 1570 Series Mounting page 24

Pole Mount Kit 2
When all three pieces of the PKM2 kit are assembled (see
wall mount bracket allows reorienting the PMK2 mount assembly by up to 90 degrees from vertical. This
allows the AP to be vertically mounted on horizontal poles and off-angle poles. The pivot bracket also
provides three sets of bolt holes for the strap brackets to attach, thereby supporting three pole diameter
ranges: 2 to 6, 6 to 11, and 11 to 16 inches (see
For more information on vertically mounting the AP on poles, see
page
You can choose to discard the pivot bracket and attach the strap brackets directly to the wall mount
bracket. However, this assembly can be used for vertically mounting the AP only on vertical poles, with
diameter ranging from 4 to 8 inches. See
Vertical Pole, page
Figure 3-16 PMK2 Wall Mount Bracket Dimensions in inches [and millimeters]
4 x
4 x .33
215.90
8.50
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3-24
3-29.
3-37.
139.60
5.50
104.14
4.10
.35
63.50
2.50
73.03
2.88
77.79
3.06
Figure 3-20), the pivot bracket attached to the
Figure 3-18 and Figure
Pole Mounting Using PMK2,
Vertically Mounting Without Pivot Bracket For 4 to 8 inches
Chapter 3 Mounting the Access Point
3-19).
29.46
1.16
239.52
9.43
OL-32138-01