Cisco Aironet 1570 Series Mounting page 46

Pole Mount Kit 3
Figure 3-32
1 Key hole slots for three of the four M8 x
12mm hex head bolts, using which the AP is
mounted on PMK3 Wall Mount Bracket.
3 Metal band straps
5 M8 x16mm bolts, used to mount the wall
mount bracket on to the pivot bracket
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3-46
Wall Bracket Attached to Strap Bracket-Pivot Bracket Assembly for Vertical Pole
2
1
6
1
5
4
2 Pole
4 M8x16mm bolts used to attach the strap
brackets to the pivot bracket. The strap
brackets are set for pole of 6 to 11 inches
diameter, and the pivot bracket is in vertical
orientation.
6 Screw hole for one of the four M8 x 12mm
hex head bolts, using which the AP is
mounted on PMK3 Wall Mount Bracket.
When this bolt alone fastens the AP to the
wall mount bracket, then it can be used to as
pivot to rotate the AP outwards for easy
access to ports 7 and 8.
Chapter 3 Mounting the Access Point
3
OL-32138-01