Cisco Aironet 1570 Series Mounting page 14

Strand Mount Kit 3
Note
Continue with installing antennas, connecting the data cables, grounding the access point, and powering
Step 4
the access point. For information on these, see
Strand Mount Kit 3
The Strand Mount Kit 3 (abbreviated as SMK3) is used when you have large external antennas mounted
to the AP using external antenna mounts such as AIR-ACCAMK1=. The SMK3 can accommodate a
3.6 inch cable bundle between the support cable strand and the back surface of the AP (see
The SMK3 can also accommodate up to 10 degrees of strand/cable droop.
The SMK3 consists of these parts:
•
•
•
For instructions on mounting an AP using SMK3, see
Figure 3-8 SMK3 Cable Clamps and Cable Bracket Assembly Dimensions in inches [and millimeters]
[118.4 - 80.3]
4.66 - 3.16
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3-14
The strand support cable and the SMK2 kit together provide the grounding for the access point.
Height-adjustable strand mount cable brackets (see
Cable clamps (see Figure
Fasteners (see Figure 3-10)
128.2
5.05
Chapter 4, "Installing Other Components."
Figure
3-10)
Strand Mounting Using SMK3, page
[91.4 - 53.3]
3.60 - 2.10
Chapter 3 Mounting the Access Point
3-10)
82.8
3.26
Figure 3-9).
3-15.
OL-32138-01