Usb Port Specifications For The Ptx1000 - Juniper PTX1000 Hardware Manual

Table 29: Console Port Connector Pinouts for the PTX1000
Pin Signal
1 RTS Output
2 DTR Output
3 TxD Output
4 Signal Ground
5 Signal Ground
6 RxD Input
7 DCD Input
8 CTS Input

USB Port Specifications for the PTX1000

USB flash drives used with the PTX1000 must support USB 2.0 or later.
CAUTION:
PTX1000. Failure to do so could expose your router to unpredictable behavior.
RELATED DOCUMENTATION
PTX1000 Management Panel | 32
Remove the USB flash drive before upgrading Junos OS or rebooting a
Description
Request to send
Data terminal ready
Transmit data
Signal ground
Signal ground
Receive data
Data carrier detect
Clear to send
71