About This Document - Siemens FDM273-O Mounting

1 About this document

Building Technologies
Fire Safety
Overview
The FDM273-O radio manual call point is intended for use in areas of a house
where a fire can be detected by people who can manually trigger an alarm.
The FDM273-O radio manual call point consists of a housing, a switching unit, and
a battery pack.
Goal and purpose
This document contains all the information required to install the FDM273-O
manual call point.
Prerequisites:
The installation location of the radio manual call point has been established.
Mounting should be performed by a specialist in compliance with safety
regulations.
Intended use
The radio manual call point FDM273-O may only be used in a fire detection system
with a radio gateway approved by the manufacturer.
The radio manual call point FDM273-O is compatible with the radio module
FDRF272-O.
You will find more information on the radio fire detector in document
A6V10425645 'Technical Manual Radio manual call point FDM273-O'.
Applicable documents
Document ID Title
A6V10431682 Data sheet Radio fire detection system OEM
A6V10425645 Technical Manual Radio manual call point FDM273-O
You will find information on how to integrate the radio fire detector into a radio cell
in the radio gateway manufacturer's documentation.
About this document
1
5 | 18
A6V10425648_en--_f
2016-11-28