Table of Contents
Advertisement
A6V10347888_h_en_--
1 About this document
Overview
The FDM273 radio manual call point is intended for use in areas of a house where
a fire can be detected by people who can manually trigger an alarm.
The FDM273 radio manual call point consists of a housing, a switching unit, and a
battery pack.
Goal and purpose
This document contains all the information required to install the FDM273 manual
call point.
Prerequisites:
●
The installation location of the radio manual call point has been established.
●
Mounting should be performed by a specialist in compliance with safety
regulations.
You will find more information on the FDM273 radio manual call point in document
A6V10347733.
Applicable documents
Document ID
A6V10271323
A6V10227631
A6V10347733
Intended use
The radio manual call point FDM273 may only be used together with a radio
gateway FDCW241 in a fire detection system FS20/FS720.
Title
Data sheet SWING Neural radio fire detector FDCW241,
FDOOT271, FDM273, FDM275, FDM275(F)
Planning Radio fire detection system SWING
Technical Manual Radio manual call point FDM273
About this document
1
5 | 18
Advertisement
Table of Contents
