About This Document - Siemens FS20 Application Manual

1 About this document

Target group
Product Manager
Project engineer
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document is intended for the planning of fire detection installations in terms of
lightning protection and voltage surge protection. It also contains information
relating to the application and should be given to the technical personnel to assist
them. It provides basic information but not technical information. This document
does not replace any applicable standards.
Target groups
The information in this document is intended for the following target groups:
Activity
● Is responsible for information
passing between the manufacturer
and regional company.
● Coordinates the flow of information
between the individual groups of
people involved in a project.
● Sets parameters for product
depending on specific national
and/or customer requirements.
● Checks operability and approves
the product for commissioning at the
place of installation.
● Is responsible for troubleshooting.
● Configure the product at the place
of installation according to
customer-specific requirements.
● Check the product operability and
release the product for use by the
operator.
● Searches for and corrects
malfunctions.
● Carries out all maintenance work.
● Checks that the products are in
perfect working order.
● Searches for and corrects
malfunctions.
Source language and reference document
● The source/original language of this document is German (de).
● The reference version of this document is the international version in English.
The international version is not localized.
Document identification
The document ID is structured as follows:
About this document
Technical terms
Qualification
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for Product Managers.
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for Product Engineer.
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for commissioning personnel.
● Has obtained suitable specialist
training for the function and for the
products.
1
5 | 42
2016-04-04