Table of Contents
Advertisement
Target group
Product Manager
Project Manager
Project engineer
Installation personnel
Commissioning personnel
Maintenance personnel
A6V10401120_g_en_--
1 About this document
Goal and purpose
This document contains all information on the radio manual call point FDM275.
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Intended use
The radio manual call points FDM275 and FDM275(F) may only be used together
with a radio gateway FDCW241 in a fire detection system FS20/FS720.
Target groups
The information in this document is intended for the following target groups:
Activity
●
Is responsible for information
passing between the manufacturer
and regional company.
●
Coordinates the flow of information
between the individual groups of
people involved in a project.
●
Coordinates the deployment of all
persons and resources involved in
the project according to schedule.
●
Provides the information required to
run the project.
●
Sets parameters for product
depending on specific national and/
or customer requirements.
●
Checks operability and approves
the product for commissioning at
the place of installation.
●
Is responsible for troubleshooting.
●
Assembles and installs the product
components at the place of
installation.
●
Carries out a function check
following installation.
●
Configures the product at the place
of installation according to
customer-specific requirements.
●
Checks the product operability and
releases the product for use by the
operator.
●
Searches for and corrects
malfunctions.
●
Carries out all maintenance work.
●
Checks that the products are in
perfect working order.
●
Searches for and corrects
malfunctions.
Document identification
The document ID is structured as follows:
About this document
Qualification
●
Has obtained suitable specialist
training for the function and for the
products.
●
Has attended the training courses
for Product Managers.
●
Has obtained suitable specialist
training for the function and for the
products.
●
Has attended the training courses
for Project Managers.
●
Has obtained suitable specialist
training for the function and for the
products.
●
Has attended the training courses
for Product Engineer.
●
Has received specialist training in
the area of building installation
technology or electrical installations.
●
Has obtained suitable specialist
training for the function and for the
products.
●
Has attended the training courses
for commissioning personnel.
●
Has obtained suitable specialist
training for the function and for the
products.
1
5 | 46
Advertisement
Table of Contents
