Table of Contents
Advertisement
Mounting and installation
2
Installation
2.3 Installation
8 | 18
Building Technologies
Fire Safety
2
3
1
10
9
1 Screws
2 Switching unit FDME273
3 Battery connector
4 Housing FDMH273-R
5 Door
Not included in the scope of delivery
1
The flashing behavior of the internal alarm indicator is described in document
A6V10425645 in the 'Internal alarm indicator' chapter.
w The housing has been installed.
w The radio gateway has been activated and switched to maintenance mode.
w The battery pack and switching unit are available.
w The switching unit is set to the factory settings.
w The door (5) is open.
w The alarm button (10) on the switching unit (2) has not been pressed and is
protruding by about 5 mm.
4
1
8
6 Battery pack BAT3.6-10
7 Holders
8 Locking lever
9 Internal alarm indicator
10 Alarm button
5
3
7
1
A6V10425648_en--_f
2016-11-28
2
6
7
Advertisement
Table of Contents
