Fixing The Backguard - Fisher & Paykel OR90SDBGFX3 Installation Instructions Manual

DO NOT DRAG the cooker. Lift the feet clear of
the floor.

Fixing the Backguard

Before installing the cooker, assemble the backguard
"C".
The backguard "C" can be found packed at the rear of
the cooker.
1. Before assembling, remove any protective film/
adhesive tape.
2. Remove the two spacers "A" and the screw "B"
from the rear of the cooktop.
3. Assemble the backguard as shown and fix it by
screwing the central screw "B" and the spacers "A".
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX...
Fig. 6 Incorrectly moving the cooker
Fig. 7 Assembling the backguard
Updated: Thu, 26 Mar 2020 03:34:19 GMT
Powered by
6