Levelling The Cooker - Fisher & Paykel OR90SDBGFX3 Installation Instructions Manual

Levelling the Cooker

Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
• For ease of installation, first remove the kickstrip. To remove the kickstrip, unscrew the two screws holding it in
place.
• The cooker is already fitted with four levelling feet.
• Level the cooker by screwing or unscrewing the feet.
• Make sure you follow the instructions in Figs. 2a, 2b, and 2c.
Nuts are supplied with the cooker in a separate kit.
• Do not refit the kickstrip until you have installed the anti-tip bracket.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SDBGFX3/User_Guide_OR90SDBGFX...
Updated: Thu, 26 Mar 2020 03:34:19 GMT
Powered by
2