Safety And Warnings - Fisher & Paykel DW24U6I1 Installation Manual

WARNING!
Electrical Shock Hazard
Before installing the dishwasher, remove the house fuse or open the
circuit breaker.
Ensure that a qualified electrician or service representative has checked
if the appliance is properly grounded.
Improper connection of equipment-grounding conductor can result to
risk of electric shock.
Do not modify the power supply plug provided with the appliance — if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
Do not use an extension cord, adapter plug or multiple outlet box.
Ensure the dishwasher is completely enclosed at the time of installation
to reduce the risk of electrical shock, fire, or personal injury.
Ensure the dishwasher is disconnected from the power supply before
fitting the front panels.
Ensure components such as panel bracket and any custom metal
component (eg handle) that extends past the rubber seal, are electrically
grounded after installing the front panels.
Failure to follow these advice may result in electrical shock or death.
WARNING!
Cut Hazard
Take care — panel edges are sharp.
Failure to use caution could result in injury or cuts.
1

SAFETY AND WARNINGS

IMPORTANT SAFETY GUIDE
This dishwasher is manufactured for indoor use only.
z
z
Ensure to follow safety and the warnings to prevent electrical shock, injury or fire.
z z
Ensure to remove all packaging materials supplied with the dishwasher.
z z
This dishdrawer is intended for connection to the hot-water supply.
z z
The dishwasher MUST be installed to allow for future removal from the enclosure if
z
z
service is required.
Installation of this dishwasher requires basic mechanical and electrical skills.
z z
Installation must comply with your local building, electricity, and plumbing regulations.
z z
It is the responsibility of the plumber and electrician to ensure that each installation
z
z
complies with all Codes and Regulations.
The switched power outlet must be located outside the dishwasher cavity to allow easy
z z
access after installation. Take care when installing or removing the appliance to avoid
possible damage to the power supply cord and hoses.
If the dishwasher is to be relocated from one installation to another it must be kept
z
z
upright to avoid damage from water spillage.
Make sure only new hoses are used for connection (supplied with the dishwasher).
z z
Old hoses should not be reused.
Failure to install the dishwasher correctly could invalidate any warranty or liability claims.
z
z
Fitting integrated front panels requires access to electrical service areas. This work must
z z
be performed and certified by a qualified electrical service technician.
Ensure the appliance is not plugged in when fitting custom panels.
z z
Failure to install the custom panels correctly could invalidate any warranty or
z
z
liability claims.
At the completion of the dishwasher installation, the Installer must perform
z z
the Final Checklist.
GROUNDING
This appliance must be grounded. In the event of a malfunction or breakdown, grounding
z z
will reduce the risk of electric shock by providing a path of least resistance for
electric current.
This appliance is equipped with a cord having an equipment-grounding conductor and a
z z
grounding plug. The plug must be plugged into an appropriate outlet that is installed
and grounded in accordance with all local codes and ordinances.
If the dishwasher is installed as a permanently connected appliance:
z
z
This appliance must be connected to a grounded metal, permanent wiring system,
or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on the appliance.
3