Table of Contents
Advertisement
COUNTERTOP
Moisture
3/8"
protection tape
(10mm)
must be applied
WARNING!
Incorrect placement of the hole
will result in damage to hoses.
Max 1/4" (5mm)
Max distance
between hole edge
and rear inner face
Max 1/2" (10mm)
z
Max distance between
hole edge and floor
z
9
CAVITY PREPARATION
IMPORTANT!
The power outlet must be located in
a cabinet adjacent to the dishwasher
cavity. 110-120 VAC max. 15 A
Service Holes
Can be located either side of dishwasher, close to the rear face and
the floor, as illustrated, for access to the water supply and drain.
If the hole is through wood, make sure its edges are smooth
z
and rounded.
If the hole is through metal, ensure you fit the supplied Edge
z
Protector to prevent damage to the power cord.
max. 17 11/16"
(450mm)
Ø 1 1/2"
(38mm)
Water Connection
Recommended HOT
(Maximum 140°F/60°C).
Supplied hose to suit 3⁄ 8 " (9mm)
male compression fitting.
Water Pressure
Water softener models
Max. 1 MPa (145 psi)
Min. 0.1 MPa (14.5 psi)
Models without water softener
Max. 1 MPa (145 psi)
Min. 0.03 MPa (4.3 psi)
IMPORTANT!
When connecting drain line to
disposer, check to be sure that
drain plug has been removed.
Dishwasher will not drain if plug
is left in place.
Remove drain plug
9
Hide quick links:
Advertisement
Table of Contents
