Table of Contents
Advertisement
IMPORTANT!
The infill bracket is installed as a cosmetic feature to fill the empty space
z
z
visible for cabinets with cavity height of 35.5" or above.
Installation of infill bracket is not needed for cabinets with ADA standard.
z
z
Remove upper mounting bracket and plastic plugs
1
Open the door.
z
z
Unscrew the upper mounting bracket from the top
z
z
of the appliance.
Push a small screwdriver downward through the
z
z
screw hole from the top of the appliance to remove
the plastic plug.
10
!0
ATTACH INFILL BRACKET
Install the infill bracket
2
Remove two screws pre-installed from the
z
z
infill bracket.
Use the same screws to attach the bracket to the
z
z
top of the appliance. Do not tighten fully.
side wings
Align and adjust appliance in cabinetry
3
Push the appliance into the cabinetry.
z
z
Ensure the infill bracket do not hit the top of the
cabinet while pushing. (Refer to 'Align appliance in
cabinetry' for more details.)
Slide the side wings of the bracket outward to cover
z
z
the hollow space.
Hand tighten the two screws.
z
z
Hide quick links:
Advertisement
Table of Contents
