Henny Penny GVE-071 Operator's Manual page 49

6-1
GVE SPECIAL
March 2019
SECTION 6: LEVEL 3 PROGRAMMING
1. Press and hold the TEMP and INFO buttons at the same
time until level 3 is displayed, enter password 11221122, and
enter 3 levels of programming.
2. Use the UP/DWN button loop menu to select Special
Programming.
3. Using the UP/DWN button Loop menu, select SP-17 "User
Polish Enabled?"? Then select "YES".
4. Set the polishing time, the default is 15 minutes.
5. Exit Menu
42